Alpine CVA-1000E Owner's Manual page 40

1
2
3
40
CD/3D/6D
BAND AUDIO VISUAL
PROG SEL SEL
A.PROC DEFEAT
MUTE
SELECT
A V
(Remote Control)
SOURCE
x
AUDIO
SEL
CD Shuttle Operation
Multi-Changer Selection
You can connect and operate 2 or more (6
maximum) Alpine CD Shuttles through Ai-NET.
These CD Shuttles must be connected to the
CVA-1000E using the Multi-Changer Switching
device (KCA-400C). If you use 1 Switching
device, you can connect up to 4 CD Shuttles. If
you use 2 Switching devices, you can connect
up to 6 CD Shuttles.
Press the SOURCE button on the CVA-1000E.
The display shows the menu.
Note: Pressing the SOURCE button while
driving (Parking Brake OFF) will cause
the audio source to change immedi-
ately. The SOURCE Selection menu
will not appear. Press the SOURCE
button repeatedly until you are in the
CD Shuttle mode.
Turn the rotary switch on the CVA-1000E and
select "CHG" from the menu. Press the rotary
switch.
The display changes to the CD Shuttle control
screen.
Press the AUDIO SEL button on the Remote
Control (RUE-4160) to activate the CD Shuttle
mode.
Press the NEXT (0/) button on the CVA-
1000E.
The display changes to the CD Shuttle
selection screen.
English