Page 1
AUTOMÓVILES/ NUR FÜR AUTOMOBIL GEBRAUCH/ SOLO PER L’UTILIZZO IN AUTOMOBILE/ ENDAST FÖR BILBRUK/ ALLEEN VOOR GEBRUIK IN DE AUTO/ DO UŻYCIA TYLKO W SAMOCHODZIE DAB/CD/USB RECEIVER WITH ADVANCED BLUETOOTH CDE-205DAB DIGITAL MEDIA/DAB RECEIVER WITH ADVANCED BLUETOOTH UTE-204DAB DIGITAL MEDIA/DAB RECEIVER UTE-202DAB •...
Page 2
Important notice Caution IN NO EVENT SHALL ALPINE BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF...
Page 3
If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Alpine dealer. IMPORTANT Please record the serial number of your unit in the space provided below and keep it as a permanent record.
DO NOT BLOCK VENTS OR RADIATOR WARNING PANELS. Doing so may cause heat to build up inside and may result in fire. USE THIS PRODUCT FOR MOBILE 12V WARNING APPLICATIONS. Use for other than its designed application may This symbol means important instructions. result in fire, electric shock or other injury.
Page 5
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
Guide to Parts and Controls Main unit Front panel release button (browse) (pages 13, 15, 17) Enter the browse mode during playback. (Not available when a USB device in Android Enter the call menu. Receive/end a call. mode or iPod is connected.) Press and hold for more than 2 seconds to During DAB reception: Select service.
Page 8
Controllable with Remote Control Press and hold for more than 2 seconds in the Radio mode to store stations automatically. This unit can be controlled with an optional Alpine remote control. For details, consult (back) your Alpine dealer. Return to the previous display.
Resetting the Unit Getting Started Before operating the unit for the first time, or after replacing the car battery or changing To cancel the demonstration (DEMO) connections, you must reset the unit. display, see page 22. Press and Number button 6 for more For the connection/installation, see page than 2 seconds.
Rotate the control dial to select [SET For details, see “Playing a BLUETOOTH Device DEVICE 1]* or [SET DEVICE 2]*, then press (CDE-205DAB/ UTE-204DAB only)” (page 16). To disconnect the paired device flashes while the unit is in pairing standby mode.
Page 11
• If BLUETOOTH Auto Pairing is not established, see To connect the last-connected device from “Preparing a BLUETOOTH Device (CDE-205DAB/ UTE- this unit 204DAB only)” (page 10). Activate the BLUETOOTH function on the BLUETOOTH device.
Connecting a USB Device Listening to the Radio Turn down the volume on the unit. Listening to the Radio Connect the USB device to the unit. To listen to the radio, press SOURCE to select To connect an iPod/iPhone, use the USB [TUNER].
Page 13
To listen to the same or similar program Receiving stored services even during weak reception Set [DAB SOFTLINK] to [ON] (page 22). After selecting the desired band, press a ] lights up when the corresponding number button (1 to 6). FM program is being received.
Using FM/MW/LW Using Radio Data System (RDS) Storing automatically Setting alternative frequencies (AF) and traffic announcement (TA) Press /A.ME to change the band (FM1, AF continuously retunes the station to the FM2, FM3, MW or LW). strongest signal in a network, and TA provides current traffic information or traffic programs Press and hold /A.ME for at least 2...
Page 15
Local Link function (UK only) Setting clock time (RDS CT) This function enables you to select other local stations in the area, even if they are not stored on The CT data from the RDS transmission sets the your number buttons. clock.
MP3/WMA/FLAC/AAC: – copyright-protected files Playback – DRM (Digital Rights Management) files – Multi-channel audio files Playing a Disc (CDE-205DAB only) MP3/WMA/AAC: – lossless compression files Insert the disc (label side up). Before making a connection, select the USB mode (Android mode or MSC/MTP mode) depending on the USB device (page 22).
Press SOURCE to select [BT AUDIO]. Searching a track by name Operate the audio device to start Not available when a USB device in Android playback. mode or iPod is connected. Adjust the volume on this unit. During CD or USB playback, press (browse) to display the list of search Notes categories.
Rotate the control dial to select a You can connect two cellular phones to the unit. number from the number list, then press For details, see “Preparing a BLUETOOTH Device (CDE-205DAB/ UTE-204DAB only)” (page 10). The phone call starts. From the call history Press...
To reduce echo and noise (Echo Canceler/ By redial Noise Canceler Mode) Press and hold MIC. Press Settable mode: [BTP EC/NC 1], [BTP EC/NC 2]. When two cellular phones are connected to To switch between handsfree mode and the unit, rotate the control dial to select handheld mode either phone, then press it.
Press /SETUP. the unit in advance. For details, see “Preparing a BLUETOOTH Device (CDE-205DAB/ UTE-204DAB Rotate the control dial to adjust the each only)” (page 10). To select the iPhone, press mode, then press it.
Page 21
• When connecting the iPhone to the unit via USB, do not activate Siri with the iPhone. Siri Eyes Free may not function properly, or may quit. • There is no audio sound while Siri Eyes Free is activated.
General Setup (GENERAL) Settings DEMO MODE (demonstration) Activates the demonstration: [ON], [OFF]. Canceling the DEMO Mode CLOCK ADJ (clock adjust) (page 9) You can cancel the demonstration display which appears when the source is off and the clock is CAUTION ALM (caution alarm) displayed.
Selects the front/rear speaker cut-off clock is displayed.) frequency: [OFF], [80Hz], [100Hz], [120Hz]. Checks/updates the firmware version. For details, consult your nearest Alpine dealer. AUX VOL (AUX volume level) FW VERSION (firmware version) Adjusts the volume level for each connected Displays current firmware version.
Scrolls long items automatically: [ON], [OFF]. (Not available when the AUX or tuner is selected.) BLUETOOTH Setup (BLUETOOTH) (CDE-205DAB/ UTE-204DAB only) PAIRING (page 10) Connects up to two BLUETOOTH devices: [DEVICE 1], [DEVICE 2]. [DEVICE 1] or [DEVICE 2] will be changed to the paired device name after pairing is complete .
Compact Disc (CD) standard, Updating the Firmware therefore, these discs may not be playable by To update the firmware, visit the Alpine website. this unit. • Discs that this unit CANNOT play http://www.alpine-europe.com –...
Please note that the use of this accessory with an Apple product may affect wireless performance. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Alpine dealer.
204DAB only) External antenna (aerial) connector Communication System: Sensitivity: MW: 26 μV, LW: 50 μV BLUETOOTH Standard version 3.0 CD Player section (CDE-205DAB only) Output: BLUETOOTH Standard Power Class 2 Signal-to-noise ratio: 95 dB (Conducted MAX +1 dBm) Frequency response: 20 Hz – 20,000 Hz...
Page 28
Speaker impedance: 4 Ω – 8 Ω The Bluetooth® word mark and logos are Maximum power output: 50 W × 4 (at 4 Ω) registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Alpine General Electronics, Inc. is under license. Outputs:...
Installation” (page 35). permission. If the problem is not solved, please contact your authorized Alpine dealer for assistance. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY General EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES No sound or the sound is very low.
Page 30
The display disappears from/does not appear PTY displays [- - - - - - - -]. in the display window. The current station is not an RDS station. The dimmer is set to [DIMMER ON] (page RDS data has not been received. 23).
Page 31
USB device playback BLUETOOTH function You cannot play items via a USB hub. The connecting device cannot detect this unit. This unit cannot recognize USB devices via a Before the pairing is made, set this unit to USB hub. pairing standby mode. While connected to two BLUETOOTH devices, A USB device takes longer to play.
Page 32
Echo or noise occurs in phone call Some functions do not work. conversations. Check if the connecting device supports the Lower the volume. functions in question. Set EC/NC Mode to [BTP EC/NC 1] or [BTP EC/ A call is answered unintentionally. NC 2] (page 19).
(aerial). If these solutions do not help improve the Check that [DAB ANT-PWR] is set to [ON] (page situation, consult your nearest Alpine dealer. 22). If you take the unit to be repaired because of CD NO TP: No traffic programs.
Page 34
: The beginning or the end of the disc has been reached. (underscore): The character cannot be displayed. For BLUETOOTH function: BTA NO DEV: The BLUETOOTH device is not connected or recognized. Make sure the BLUETOOTH device is securely connected, or the BLUETOOTH connection is established with the BLUETOOTH device.
• Choose the installation location carefully so that the unit will not interfere with normal driving operations. For CDE-205DAB/ UTE-204DAB • Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such as in direct sunlight or near heater ducts.
*1 Whether in use or not, route the microphone input cord such that it does not interfere with driving operations. Secure the cord with a clamp, etc., if it is installed around your feet. For details on installing the microphone, see “Installing the microphone (CDE-205DAB/ UTE-204DAB only)” (page 39).
Page 37
UTE-202DAB To DAB Antenna (Blue/White) To amplifier To power antenna To the instrument cluster illumination lead (Red) (Black) Ignition Key (Blue) (Orange) (Yellow) Battery Speakers (Green) Rear Left (Green/Black) (White) Front Left (White/Black) (Grey/Black) Front Right (Grey) (Violet/Black) Rear Right (Violet) Amplifier Subwoofers...
Page 38
In such a Dimmer Lead (Orange) case, consult your nearest Alpine dealer. This lead may be connected to the vehicle’s Fuse (10 A) instrument cluster illumination lead.
Page 39
Your Alpine dealer carries various noise suppressors, contact them for further information. • Your Alpine dealer knows best about noise Clip (not supplied) prevention measures so consult your dealer for further information.
Mounting the unit in the dashboard Installation Before installing, make sure the catches on both sides of the bracket are bent inwards 2 mm Removing the protection collar and the (3/32 in). bracket Position the bracket inside the dashboard, then bend the claws outward Before installing the unit, remove the protection for a tight fit.
Page 42
Aš, Alpine Electronics (Europe), patvirtinu, kad radijo įrenginių tipas CDE-205DAB, UTE-204DAB, UTE-202DAB Espanol [Spanish] atitinka Direktyvą 2014/53/ES. Por la presente, Alpine Electronics (Europe) declara que el Visas ES atitikties deklaracijos tekstas prieinamas šiuo tipo de equipo radioeléctrico CDE-205DAB, UTE-204DAB, interneto adresu: UTE-202DAB es conforme con la Directiva 2014/53/UE.
Page 43
Latviski [Latvian] Slovensko [Slovenian] Ar šo Alpine Electronics (Europe) deklarē, ka radioiekārta Alpine Electronics (Europe) potrjuje, da je tip radijske CDE-205DAB, UTE-204DAB, UTE-202DAB atbilst Direktīvai opreme CDE-205DAB, UTE-204DAB, UTE-202DAB skladen 2014/53/ES. z Direktivo 2014/53/EU. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā...
Page 44
California 90501, U.S.A. CS 52016 – Villepinte Phone 1-800-ALPINE-1 (1-800-257-4631) 95 945 Roissy CDG cedex FRANCE ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. Phone : + 33(0)1 48 63 89 89 161-165 Princes Highway, Hallam Victoria 3803, Australia ALPINE ITALIA S.p.A.