Adjusting Brightness Of Picture - Alpine CVA-1000E Owner's Manual

1
SOURCE
2
3
SET UP
4
Adjusting Brightness of
Picture
Press the SOURCE button.
The menu screen appears.
Note:
Turn the rotary switch and select the AUX 1 or
AUX 2 menu, then press the rotary switch.
The AUX 1 or AUX 2 mode will be activated.
x
Press the SET UP button.
The Set Up screen appears.
Turn the rotary switch and select the Visual
cont. menu, then press the rotary switch. The
screen changes to the Visual Control screen.
x
Basic Operation
Pressing the SOURCE button while
driving (Parking Brake OFF) will cause
the audio source to change immediately.
The SOURCE Selection menu will not
appear.
The Brightness control can also be
accessed by pressing the SET UP button
and going directly to the VISUAL screen.
The Parking Brake must be ON to
access the SET UP screen. Trying to
access this screen while driving will
display the warning – CAN'T OPERATE
WHILE DRIVING.
English
17