Bluetooth Operation; Setup Before Using; About Bluetooth; Before Using Hands-Free Function - Alpine CDE-103BT Owner's Manual

BLUETOOTH
Operation
Rotary encoder
..INOICE DIAL SOUND/SETUP
=
0 c:::J
Db
nil
liB
odll)~
olllFl@
1\
\""-
~
0 0
I I I
'=>/MUTE/~
1 ~ ~2
~/II/ENT
Setup Before Using
AboulBLUETOOTH
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices.
• Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
• Properfunction of this unit with all BLUETOOTH compatible
devices is nol guaranteed. For handling ofthe BT compatible device,
consult your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations. be sure to stop
your car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner's Manual of the
connected device(
01').
Before Using • Hal1ds-Free Function
Before using the hands-free phone/audio function, the following
seltings need to be made.
1
Be sure to set "INT MUTE" to OFF. Refer to the
SETUP function on page 15.
• To enable sound pass-through of the BLUETOOTH compatible
device, make sure thatlNT MUTE is turned OFF (Initial selling on
the unit is OFF).
2
Set "BT IN" to BT ADAPTER (page 16).
• Before using a hands-free phone, it must be paired with this unit.
Refer to "BLUETOOTH SETUP" (pages 18-19).
is-EN
For details on the control from a BLUETOOTH compatible device,
refer to the Owner's Manual of the BLUETOOTH compatible device.
1
Set a BLUETOOTH connection from a BLUETOOTH
compatible device.
2
The PIN code ("0000") is displayed on the connected
unit.
• The PIN code is fixed as "0000."
3
Input the PIN code ("0000") in a BLUETOOTH
compatible device.
4
If this unit is successfully connected to a
BLUETOOTH compatible device, "CONNECTED" is
displayed, and then the unit returns to normal mode.
• The registration number 5 is deleted when you set ignition from ACC
to OFF.
if
all the 5 positions have been registered, you cannot
register the 6th device. To register another device, you need to delete
one of the device from position I to 5 first.
• If a BLUETOOTH compatible device is
succes.~fully
connected, the
next time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However.
the connection may fail.
if
the auto connection fails, try the
connection manually.
• Set "Selling the Search Mode" (page
/9)
to VlSI M ON
to
enable this
unit to recognize a mobile phone. For mobile phone passkey
(passcode) input operation, refer to the mobile's Owner's Manual.
BLUETOOTH SETUP
BLUETOOTH Setup ClperEltion
The following steps I to 4 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
• While calling, BLUETOOTH Setup operation cannot be performed.
• Set "BT IN" to BT ADAPTER, and then perform BLUETOOTH
SETUP operation.
1
Press and hold
SOUND/SETUP
for at least 2
seconds to activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
items and then press
~/II/ENT.
BT IN
H
PAIRED DEV*
H
VISIBLE M*
H
AUTO ANS*
H
CLEAR DEV*
H
SEV NAME*
H
MIC INPUT*
H
SPEAKER SL*
H
FW VERSION*
H
FW UPDATE*
*
When "BT IN" is set to BT ADAPTER, the above items are
displayed.
3
Turn the Rotary encoder to change the settings.
4
Press and hold
SOUND/SETUP
for at least
2 seconds.
The SETUP mode is canceled.