Setting The Bluetooth Connection (Bt In); Subwoofer On And Off I; Setting The Subwoofer System; Changing Lighting Color - Alpine CDE-103BT Owner's Manual

BLUETOOTH Setting
Scroll Type Setting
SCR TYPE1 /SCR TYPE2 (Initial setting)
Choose from two scrolling methods.
Select the type you prefer.
Setting the BLUETOOTH Connection (BT IN)
BT ADAPTER (Initial setting) / BT OFF
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped mobile phone.
Set ADAPTER when the BLUETOOTH function is used. For details on
the set up procedure, refer to "BLUETOOTH SETUP" on page 18.
• If the mobile phone compatible with the Vrlice Dialfunction is
connected, the Vrlice Dialfunction can be used.
SCRTYPE1:
SCRTYPE2:
The characters scroll from right to left, a
single character at a time.
Words are built up from left to right, a single
character at a time. When the display is filled,
it is cleared and the remaining words are
displayed the same way until all words of the
title have been shown.
Sound Customizing
Scroll Setting (TEXT SCR)
SCR AUTO / SCR MANU (Initial setting)
• The unit scrolls CD text names, folder names, file names or tag
display.
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3IWMAIAAC
files, folder names and tags.
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
In the normal mode, press Rotary encoder (AUDIO)
repeatedly to select the SUBWOOFER mode.
SUBWOOFER
~
BASS LEVEL
~
TRE LEVEL
~
BALANCE
~
FADER
~
DEFEAT
~
VOLUME
~
SUBWOOFER
2 Adjust the level by turning the Rotary encoder.
SCRAUTO:
SCR MANU:
The CD text information, the text information of
folder and file names, and the tags are
scrolled automatically.
The display is scrolled when a disc is loaded
or when a track is changed, etc.
Setting the Subwoofer System
SUBW SYS 1 (Initial setting) / SUBW SYS 2
Select either SYS I or SYS 2 for the desired subwoofer effect.
SUBW SYS 1: Subwoofer level changes according to the main
volume setting.
SUBW SYS 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Demonstration
DEMO ON / DEMO OFF (Initial setting)
This unit has a demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.
MP3IWMAJAAC
Visual Customizing
You can change the lighting color of the following four buttons.
SOURCE/<!>, BAND,~,~.
Changing Lighting Color
ILUM TYPE1 (Initial setting) / TYPE2/ TYPE3 / TYPE4
TYPE1 :
TYPE2:
TYPE3:
TYPE4:
When the color of the four buttons is blue,
the color of the other is red.
When the color of the four buttons is green,
the color of the other is green.
When the color of the four buttons is amber,
the color of the other is red.
When the color of the four buttons is red, the
color of the other is red.
Playing MP3IWMAlAAC Data (PLAY MODE)
CD-DA (Initial setting) / CDDAlMP3
This unit can play back CDs containing both CD and MP3IWMAlAAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMAIAAC data, playback
starts from the CD data portion of the disc.
CD-DA: Only the CD data in Session 1 can be played back.
CDDAlMP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
Dimmer Control
DIM AUTO (Initial setting) / DIM MANUAL
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head fights of the vehicle ON. This mode
is useful if you feel the unit's backlighting is too bright at night.
• Thefunction is inoperable when the ILLUMINATI is set to other than
TYPEI, refer to "Changing Lighting Color" on page 16.
16-EN
External Device
Turning Mute Mode On/Off (INT MUTE)
MUTE ON / MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.