Connecting To An External Amplifier (Power Ic); Setting The Aux+ Setup Mode; Setting The Aux Name Mode - Alpine CDE-103BT Owner's Manual

Connecting to an External Amplifier (POWER IC)
POW ON (Initial setting) / POW OFF
Setting the AUX+ SETUP Mode
AUX+ ON / AUX+ OFF (Initial setting)
When an external
amplifi~r
is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCE-237B) for building up the AUX IN (optional) is required.
Setting the AUX NAME mode
AUXILlARY*' (Initial setting) / TV / DVD / PORTABLE*2 / GAME
You can change the AUX NAME display in the SETUP mode.
*'
After {he ,I'effing is comple{ed, AUX is displayed on {he uni{.
*2
Af{er {he seffing is completed, PMD is displayed on the uni{.
A portable music device and an iPhoneliPod cannot be connected to the
Full Speed connector at the same time.
AUX+ ON: Sel to ON when a portable device is connected. If
SOURCE/<!> is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.
You can change the AUX+ name display when AUX+ SETUP is set to
ON. Press
~
/11 lENT when AUX+ SETUP is set to ON, and select
AUX+ NAME by turning the Rotary encoder, then press ~ /11 lENT.
After that, turn the Rotary encoder to select the desired AUX+ name.
Rear
right
Front
left
Front
right
Rear
left
Front
right
Speakers
8
The speakers are driven by the built-in
amplifier.
Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit's internal amplifier is
turned OFF and cannot drive speakers.
@:x:
Amplifier
@ .. ,
@:x:
Amplifier
@
SPEAKER
RIGHT FRONT
POW ON :
POW OFF:
SPEAKER
RIGHT REAR
8
Rear
right
SPEAKER
LEFT REAR
8
Rear
left
SPEAKER
LEFT FRONT
8
Front
left
• No sound is produced by the sys{em when {he power
OU{PU{
is se{ to
OFF.
17-EN