Bluetooth Audio Operation; Recalling The Bluetooth Audio Mode; Selecting The Desired Song; Pausing - Alpine CDE-163BT Owner's Manual

Bluetooth Audio Operation

With a Bluetooth compatible Smartphone or music player, it's possible to
play and control music playback wirelessly
* To play back audio, a Smartphone or a portable player conforming to
A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
Notes
• Set BT IN to ON when you want to use Bluetooth Audio function. Refer
to "Setting the Bluetooth Connection (BT IN)" on page 29.
• During a call, sound on the Bluetooth audio source is muted.
• If you operate the Hands-free phone (e.g. searching in the phone book)
while using the Bluetooth Audio function, Bluetooth Audio playback
may be affected.

Recalling the Bluetooth Audio Mode

Press V/SOURCE to select the BT AUDIO mode.

Selecting the desired Song

Press  or  to select the desired Song.
Pressing and holding  or  will fast backward/fast
forward track continuously.
Note
• The action depends on the paired device.

Pausing

Press .
A playback stops. Pressing again will resume a playback.

Selecting the desired Group

Press  or  to select the desired Group.
Note
• This function is not available on all paired devices.

Searching for a desired song

Artist name, album name, etc., may be searched and displayed during
playback or pause.
1
Press ENTER to activate the search mode.
2
Turn the Rotary encoder to select the desired Group
(Folder), and then press ENTER.
3
Turn the Rotary encoder to select the desired album,
folder, etc., within the selected Group (Folder), and then
press ENTER.
4
Repeat step 3 if necessary until the desired song is found.
Notes
• Search mode may differ depending on the paired device.
• The pause mode may be canceled after the search.
• This function may not available depending on the paired device.
34
-EN
*
.

Flash Memory (optional)

/SOURCE
Playback MP3/WMA/FLAC Files from Flash
Memory (optional)
If a Flash Memory device is connected to the unit, MP3/WMA/FLAC
files can be searched and played back.
1
Press VSOURCE to select the USB AUDIO mode.
2
To pause playback, press .
Pressing  again will resume playback.
Notes
• This unit plays back files in Flash Memory with the same controls and
modes used for playback of CDs containing MP3/WMA. For details,
refer to "CD/MP3/WMA (CDE-163BT Only)" on page 12.
• The root folder is displayed as "\ROOT".
• Before disconnecting Flash Memory, be sure to change to another source
or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
USB Memory
(sold separately)
or
Cable (sold
USB Memory
separately)
(sold separately)