Using the System Configuration Program
IP Connectivity Test (Ping)
Use the IP Connectivity Test to see if another site on the Internet can be reached.
The screen shown below is described in the following table.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
IP Address
Test Times
Interval
Success/Failure
2-12
Alcatel OmniStack 6148
< IP Connectivity Test(Ping) >
IP Address :
Test Times : 1
Success
: 0
[Start]
Description
IP address of the site you want to ping.
The number of ICMP echo requests to send to the specified site.
Range: 1~1000
The interval (in seconds) between pinging the specified site.
Range: 1~10 seconds
The number of times the specified site has responded or not to
pinging.
Interval : 3
Failure
: 0
<Ok>