Main Menu - Alcatel OMNISTACK 6148 User Manual

Web-Based Management

Main Menu

Using the on-board Web agent, you can define system parameters, manage and
control the switch, the connected stack and all its ports, or monitor network conditions.
The following table briefly describes the selections available from this program.
Menu
System
Switch
IP
SNMP
Security
Upgrade
Configure
Address Table
STA
Bridge Extension
Priority
VLAN Management
VLAN
IGMP
Port
Mirror
Trunk
Statistics
3-6
Description
Provides basic system description, including contact information.
Shows hardware/firmware version numbers, power status, and expansion
modules in use.
Includes boot state, IP address, and the maximum number of Telnet sessions
allowed.
Configures communities and trap managers; and activates traps.
Sets password for system access.
Downloads new version of firmware to update your system.
Saves the switch configuration to a file on a TFTP server. This file can be later
downloaded to restore the configuration.
Provides full listing of unicast addresses, sorted by address or VLAN.
Enables Spanning Tree Algorithm; also sets parameters for switch priority, hello
time, maximum message age, and forward delay; as well as port priority and
path cost.
Displays/configures extended bridge capabilities provided by this switch,
including support for traffic classes and VLAN extensions.
Configures default port priorities and displays queue assignments.
Allows management access of the switch from all VLANs or only from a
specified VLAN.
Configures VLAN group members and other port-specific VLAN settings.
Configures IGMP multicast filtering.
Enables any port, sets communication mode to auto-negotiation, full duplex or
half duplex, and enables/disables flow control. Also configures broadcast storm
control and port security.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Displays statistics on network traffic passing through the selected port.