Main Menu - Alcatel OMNISTACK 6148 User Manual

Using the System Configuration Program

Main Menu

With the system configuration program you can define system parameters, manage
and control the switch, the connected stack and all its ports, or monitor network
conditions. The figure below of the Main Menu and the following table briefly
describe the selections available from this program.
Note: Options for the currently selected item are displayed in the highlighted area at the
bottom of the interface screen.
Use <TAB> or arrow keys to move. <Enter> to select.
Menu
About this product
System Information
Switch Information
Management Setup Menu
Network Configuration
Serial Port Configuration
SNMP Configuration
Console Login Configuration
TFTP Download
Configuration Save & Restore
Management Configuration
Banner Message Configuration
2-4
Alcatel OmniStack 6148
< Main Menu >
About this product
Management Setup Menu
Switch Configuration Menu
Network Monitor Menu
Reset System Menu
Quit Current Session
Description
Provides basic system description, including contact information.
Shows hardware/firmware version numbers, power status, and
expansion modules used in the stack.
Includes IP setup, Ping facility, HTTP (Web agent) setup, Telnet
configuration, and MAC address.
Sets communication parameters for the serial port, including
management mode, baud rate, console time-out, and screen data
refresh interval.
Activates traps; configures communities and trap managers.
Sets user names and passwords for system access, as well as the
invalid password threshold and lockout time.
Downloads new version of firmware to update your system (in-band).
Saves the switch configuration to a file on a TFTP server. This file can
be later downloaded to restore the configuration.
Allows management access to the switch from all VLANs or only from a
specified VLAN.
Configures a login security alert message.