Web-Based Management
Port State Display
Click on any port to display a summary or port status as shown below, as well as
Etherlike statistics (page 3-42) and RMON statistics (page 3-43).
Parameter
Type
Admin Status
Link Status
Speed Status
Duplex Status
Flow Control Status
VLAN
3-4
Description
Shows port type as:
10/100TX:
10BASE-T / 100BASE-TX
Shows if the port is enabled, or has been disabled due to abnormal behavior or
for security reasons. See "Port Configuration" on page 3-34.
Indicates if the port has a valid connection to an external device.
Indicates the current port speed.
Indicates the port's current duplex mode.
Shows the flow control type in use. Flow control can eliminate frame loss by
"blocking" traffic from end stations connected directly to the switch.
The VLAN ID assigned to untagged frames received on this port. You can set the
default Port VLAN ID (PVID) under "VLAN Port Configuration" on page 3-30 to
assign ports to the same untagged VLAN.