Powering The Touch Control On And Off; Calling And Answering; Answering A Call - Polycom SoundStructure Systems User Manual

User's Guide for Polycom SoundStructure Systems with the Polycom Touch Control Device

Powering the Touch Control On and Off

Calling and Answering

Answering a Call

2
To power on the Polycom Touch Control device:
>> Reconnect the LAN cable to the underside of the device.
To power off the Polycom Touch Control device:
From the Home screen touch
1
Scroll to the Power section.
2
Select Touch Control Power.
3
In the menu that appears, select Power Off the Touch Control. If you
4
choose to power off the Polycom Touch Control device, you must
disconnect and reconnect the LAN cable to power it on again.
To wake up the Polycom Touch Control device:
The touch control goes to sleep after 2 minutes of inactivity. Touch the screen
to wake it up.
There are three primary ways for a SoundStructure telephone call to be
handled with the Polycom Touch Control:
• Prompts you to answer the call manually
• Answers the call automatically (if auto answer is enabled),
• Does not indicate that an incoming call is present if Do Not Disturb is
enabled.
Both the Polycom Touch Control and the SoundStructure system generate an
audible ring tone when an incoming call is present and the system is not in Do
Not Disturb mode.
User Settings.
Polycom, Inc.