PnP/PCI Configurations
CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Reset Configuration Data
Disabled
Disable this function. (Default value)
ESCD
Clear PnP information in ESCD.
DMI
Update Desktop Management Information data.
Both
Clear PnP information in ESCD & update DMI data.
Resources Controlled by
Manual
User can set the PnP resource (I/O Address, IRQ & DMA channels)
used by legacy ISA DEVICE.
Auto (ESCD)
BIOS automatically use these PnP rescuers. (Default value)
PnP/PCI Configurations
Disabled
Auto (ESCD)
Press Enter
Disabled
Figure 8: PnP/PCI Configurations
84
BIOS Setup
Item Help
Menu Level 4
When resources are
controlled manually,
assign each system
interrupt a type,
depending on the type
of device using the
interrupt
F1:General Help