Gigabyte 6OXM7E Series User Manual page 85

UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Set onboard I/O chip UART to ASKIR Mode.
IrDA Set onboard I/O chip UART to IrDA Mode.
SCR Set onboard I/O chip UART to SCR Mode.
Normal Set onboard I/O chip UART to Normal Mode. (Default Value)
UR2 Duplex Mode
IR Function Duplex Half. (Default Value)
Half
IR Function Duplex Full.
Full
Onboard Parallel port
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
SPP Using Parallel port as Standard Parallel Port. (Default Value)
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
AC Back Function
Memory This function depends on computer status.
Soft-Off Set System Soft-Off Status. (Default value)
Full-On Set System Full-On Status.
Game Port Address
Disabled Disabled this function.
201 Set onboard game port is 201. (Default value)
209 Set onboard game port is 209.
Midi Port Address
Disabled Disabled On Board Midi Port.
300 Set On Board Midi Port is 300.
330 Set On Board Midi Port is 330. (Default value)
78
BIOS Setup