Pnp/Pci Configurations - Gigabyte 6OXET Series User Manual

PnP/PCI Configurations

CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software
Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
PCI1/PCI5 IRQ Assignment
PCI2/PCI6 IRQ Assignment
PCI3 IRQ Assignment
PCI4 IRQ Assignment
↑↓→ ←Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
• • • •
Reset Configuration Data
Disabled this function. (Default value)
Disabled
ESCD Clear PnP information in ESCD.
DMI Update Desktop Management Information data.
Both Clear PnP information in ESCD & update DMI data.
• • • •
Resources Controlled by
Manual
Auto (ESCD)
• • • •
IRQ Resources ( 3,4,5,7,9,10,11,12,15 )
PCI Device
Reserved
PnP/PCI Configurations
Figure 8: PnP/PCI Configurations
User can set the PnP resource (I/O Address, IRQ & DMA channels)
used by legacy ISA DEVICE.
BIOS automatically use these PnP rescuers. (Default value)
The resource is used by PCI device.
Set the resource to reserved.
88
Disabled
Auto (ESCD)
Menu Level
Press Enter
When resources are
controlled manually,
Disabled
assign each system
Auto
interrupt a type,
Auto
depending on the type
Auto
of device using the
Auto
interrupt
BIOS Setup
Item Help
F1:General Help