Network Tcp/Ip - Axis 262 User Manual

NTP server
An important feature of the AXIS 262+ is that it can be used by any of the network
cameras or video servers as an NTP server. Open the configuration pages for the network
camera or video server and enter the IP address of the AXIS 262+ as the NTP server. This
will ensure that the date and time in the network cameras and video servers is
synchronized with the AXIS 262+.
Note:
The time displayed in the Main View is the current time on your PC and not the time set in the Date & Time
settings.

Network TCP/IP

The IP address of the AXIS 262+ and other network settings are configured during
installation, but they can be edited on the Network TCP/IP page if they are lost or need to
be changed. The AXIS 262+ supports dynamic and static IP addresses.
To allow the AXIS 262+ to use host names, you must provide the IP address of at least one
(the primary) DNS server.
To access NTP and/or SMTP servers with host names, they need to be configured in the
DNS server(s) on your network.
AXIS 262+ System Options
For manual date/time update
For automatic date/time updates
29