Recording Video; Scheduled Recordings - Axis 262 User Manual

Recording Video

Recording video to the AXIS 262+'s hard disk can be scheduled to take place at certain
times, triggered by an alarm or started manually. For example, if a camera is used to
monitor a workplace, you may want to record video Monday to Friday during work hours,
and also have recordings triggered from an incoming signal from an input, when e.g. a
door is opened or motion is detected. You can also start and stop the recording on any of
the cameras manually from the Main View. The camera selection tab shows if video from
the camera is being recorded and what triggered the recording.
Camera 1: Scheduled recording in progress
Camera 2: Alarm recording in progress
Camera 3: Manual recording in progress
Camera 4: Not recording

Scheduled recordings

You can configure the times and days when recordings will occur each week. Recordings
can be scheduled to start and stop multiple times on any particular day, e.g. every Tuesday
between 10:00-12:45, 14:00-16:15 and 20:30-23:00. Each day of the week can have
different schedules or the same time periods can be set for multiple days simultaneously.
Schedule a recording
1. Click
Web pages.
2. Select the camera to configure from the
Camera number drop-down list.
3. Select the day(s) and then set the start
time, end time and frame rate.
4. Click Save and repeat for additional
schedules.
Note:
Scheduled recordings can be turned off temporarily on all
cameras by selecting the OFF radio button and clicking
Save. All camera schedules are saved for future use.
Delete scheduled recordings
1. Select the camera which has a scheduled
recording that you wish to delete, from
the Camera number drop-down list.
2. Click the time period to delete in the Weekly Schedule Overview and click the
Delete button.
3. Delete all the schedules in a day by selecting the day(s), then selecting the All day
setting and clicking Delete.
> Schedule in the AXIS 262+
AXIS 262+ Recording Video
19