Subscribe to Our Youtube Channel
Related Manuals for Axis AXIS S1032
Summary of Contents for Axis AXIS S1032
- Page 1 INSTALLATION GUIDE AXIS Camera Station S1032 Recorder AXIS Camera Station S1048 Recorder...
-
Page 2: Contact Information
This document includes instructions for installing Search by product, category, or phrases AXIS Camera Station S1032 Recorder and AXIS Camera • report problems to Axis support by logging in to your Station S1048 Recorder on your network. Previous private support area experience of networking will be beneficial when installing •... -
Page 3: Installation Steps
AXIS S1032/AXIS S1048 Installation Guide This installation guide provides instructions for installing AXIS Camera Station S1032 Recorder and AXIS Camera Station S1048 Recorder. For more information about how to use the product, go to www.axis.com Installation Steps 1. Hardware overview. See page 4. -
Page 4: Hardware Overview - Axis S1032
Page 4 AXIS S1032/AXIS S1048 Installation Guide Hardware Overview - AXIS S1032 Back Panel 1 PCIe expansion card slot 1 7 Ethernet connectors (2) 2 vFlash media card slot (Optional) 8 USB connectors (2) 3 Do not use -iDRAC port... -
Page 5: Unpack And Install The Recorder
Unpack and Install the Recorder Unpack your system and identify each item, see Package Contents on page 3. Assemble the rails and install the Axis recorder in the rack following the safety instructions and the rack installation instructions provided with your system. -
Page 6: Connect The Cables - Axis S1032
Connect the Cables - AXIS S1032 Warning: Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional information, see www.axis.com NOTE: Some devices may not be included if you did not order them. - Page 7 AXIS S1032/AXIS S1048 Installation Guide Page 7 3. Secure the power cables by bending the system power cables, as shown in the illustration, and attach to the cable straps. Plug the other end of the power cables into a grounded electrical outlet or a separate power source such as an uninterruptible power supply (UPS) or a power distribution unit (PDU).
-
Page 8: Connect The Cables - Axis S1048
Connect the Cables - AXIS S1048 Warning: Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional information, see www.axis.com NOTE: Some devices may not be included if you did not order them. - Page 9 AXIS S1032/AXIS S1048 Installation Guide Page 9 3. Secure the power cables by bending the system power cables, as shown in the illustration, and attach to the cable straps. Plug the other end of the power cables into a grounded electrical outlet or a separate power source such as an uninterruptible power supply (UPS) or a power distribution unit (PDU).
-
Page 10: Set Up Software
Network Configuration AXIS Camera Station can record and play back video from cameras and video encoders that are connected to a LAN (Local Area Network) or to a WAN (Wide Area Network). Depending on the installation, follow the instructions under Network &... - Page 11 AXIS S1032/AXIS S1048 Installation Guide Page 11 First install the AXIS S1032/S1048 recorder. Then install AXIS S9001 and start AXIS Camera Station Client. From AXIS S9001, log in to the AXIS Camera Station Server installed in the AXIS S1032/S1048 recorder.
- Page 12 Page 12 AXIS S1032/AXIS S1048 Installation Guide Physical: AXIS S1032 AXIS S1048 Height 42.8 mm (1.68 inch) 86.8 mm (3.42 inch) Width With rack latches 482.4 mm With rack latches 482.4 mm (18.99 inch) (18.99 inch) Without rack latches 434.0 Without rack latches 434.0...
- Page 13 AXIS S1032/AXIS S1048 Installation Guide Page 13 Operating 20% to 80% (noncondensing) 20% to 80% (noncondensing) at a maximum wet bulb at a maximum wet bulb temperature of 29 °C (84.2 °F) temperature of 29 °C (84.2 °F) Storage 5% to 95% at a maximum wet 5% to 95% at a maximum wet bulb temperature of 38 °C...
-
Page 14: Further Information
Page 14 AXIS S1032/AXIS S1048 Installation Guide Further information For more information about the product visit www.axis.com Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and guides. Warranty For information about Axis’ product warranty and thereto related information, see... - Page 16 Ver.1.0 Installation Guide Printed: August 2014 AXIS Camera Station S1032 Recorder, AXIS Camera Station S1048 Recorder © 2014 Axis Communications AB Part No. 59344 © 2013 Dell Inc.
Need help?
Do you have a question about the AXIS S1032 and is the answer not in the manual?
Questions and answers