Add A Camera Or Video Server - Axis 262 User Manual

Add a camera or video server

The AXIS 262+ can view, record and play back video from up to eight Axis network
cameras simultaneously. When adding or removing a camera, the AXIS 262+ stops
recording on all cameras for a maximum of 10 minutes. When a camera is added, it may
take up to one minute for the live stream to be displayed.
To add a device:
1. Click
AXIS 262+'s Web pages.
2. Select an unused Camera number
from the drop-down list.
3. Enter a camera name, using a
maximum of 32 characters. The
following characters are not
allowed \ / ; : | < > * ? "
4. Enter the video server port if the
camera is connected to a 4-port
video server, otherwise leave this
as 1.
5. Specify the IP address of the camera
or video server.
6. If a user name and password are
required to access the device set the
Authentication radio button to ON
and enter the user ID and password
for the device.
7. Click Save.
Notes:
•
Added cameras must be accessible on port 80 for AXIS 262+ Video Server to be able to connect to the
camera.
•The AXIS 262+ cannot connect to cameras located outside of the proxy server.
AXIS 262+ Configuring the Network Video Recorder
> Video Sources in the
13