Genie 4CH User Manual page 50

4.2.3.2 Encoding Setting
【Channel】Select channel Number;
【Encoding Type】Select "audio & video" then the recording file will be audio and video composite streaming, select "video" the streaming will be
video only;
【Encoding Size】CIF/Half D1/D1;
【Streaming Control】Including fixed bit rate, dynamic bit rate;
【Encoding Quality】6level video quality, they're best, well, good, middle, worst, bad;
【Code Rate】Max 1 Mbps, Min64Kbps;
Caution: when the code rate control set into dynamic bit rate, the default setting will be the upper limit in the 【Code Rate】;
【IP Gap】From 0 to 255 adjustment to continues, 0 means full I frame pattern encoding;
【Frame Rate】1fps to 25fps in PAL, or 30fps UNCAL;
【Default】Channel is the First channel, encoding type is video, resolution is CIF, streaming control is dynamic code rate, the code rate upper limit is
512Kbps, frame rate is 25fps;
【Region Override】Invert, press the appear setting button and cover type selection, enter the corresponding channel video, user can select any size
area to cover by mouse, anyone can not monitor or playback the area that has been set the cover area before;
50