Genie 4CH User Manual page 31

1）VIDEO Detection
To excessive the video picture, when the system detect the motion event that the sensitivity fit for the preinstall, then motion detection alarm on.
Method of Operation:
【Channel】 Select what you want to set the motion detection function channel area;
【Alarm Mode】Select the motion detection mode: Motion Detection;
【Recording Channel】Select what you want to need the channel to recording（can repeat to select） ，when there is a alarm, the system can
automatically to start the recording in that channel, At the same time, should set the motion detection recording mode in
【Recording Setting】, set the Auto Recording mode in 【Recording Control】;
【Clear Time Delay】That means, when the motion event finish, the recording will be stopped in extending time, the time in Second, the range from
5-300;
【Channel Cruise】Anti-display■Setting when there is an alarm event, it will automatically to switch the single channel video that set the recording
channel before. The switching time setting in the【Local Display】 setting;
【Region】Move the mouse to setting, press ENTER key to enter; the set region divide into 192 (16x12) region;
The border blocks representatives where the cursor locates, the green region is dynamic detection security region, achromatic color is open
31