Subscribe to Our Youtube Channel
Related Manuals for Genie WNVR832P5AI
Summary of Contents for Genie WNVR832P5AI
- Page 1 PoE 32 Channel H.265 8MP NVR with 8HDD Bays, Facial Recognition and LPR WNVR832P5AI Quick Start Guide Please read these instructions carefully before operating the unit and keep for further reference.
- Page 2 Intro Section Please read this instruction carefully before operating the product and keep it for further reference. All examples and pictures used here are for reference only. The contents of this manual are subject to change without notice. CAUTION: • Please check the device and the accessories after getting the device.
-
Page 3: Table Of Contents
Contents 1.0 Introduction ......................4 1.1 Product Features ...................4 1.2 Product Dimensions ..................4 1.3 Specification....................5 1.3 Specification....................6 2.0 HDD Installation ....................7 3.0 Rear Panel Instruction ..................8 4.0 Start Up and Shut Down ..................9 5.0 Login ........................10 6.0 Configurations and Connections ................11 6.1 Network Configuration &... -
Page 4: Introduction
“Xpert” range of face recognition and LPR IP cameras. The WNVR832P5AI features up to 16 channel simultaneous playback as well as 16 PoE network ports which supports direct connection from the IP camera to the NVR. The NVR can support the latest H.265 and H.264 encoding streams. -
Page 5: Specification
Quick Start Guide PoE 16 Channel H.265 8MP NVR with 8HDD Bays, Facial Recognition and LPR 1.3 Specification Model WNVR832P5AI Embedded Linux System Mobile OS iOS, Android IP Video Input 32 channel IPC input Incoming Bandwidth 256Mbps Outgoing Bandwidth 256Mbps 12MP / 8MP / 6MP / 5MP / 4MP / 3MP / 1080p / 1280 ×... -
Page 6: Specification
Quick Start Guide PoE 16 Channel H.265 8MP NVR with 8HDD Bays, Facial Recognition and LPR 1.3 Specification Model WNVR832P5AI Interface RJ45 1000 Mbps × 1 PoE Port RJ45 × 16 (IEEE802.3af, output power: ≤ 150W) Network Protocol TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, HTTP, HTTPs, 802.1x, Onvif, etc. -
Page 7: Hdd Installation
2.0 HDD Installation This series of the product supports 8 SATA hard drives. Please make sure that the device is powered off before the installation. The pictures of the installation are for reference only. Remove the cover and loosen the screws to take out two mounting bars. 2. -
Page 8: Rear Panel Instruction
3.0 Rear Panel Instruction The interfaces of the rear panel are for reference only. PoE Ports ALARM OUT ALARM IN AUDIO RS 485 e-SATA 2 4 6 8 10 AUDIO 1 3 5 7 HDMI Internet Name Description PoE Ports PoE network ports, connect to PoE IP camera Network port e-SAT... -
Page 9: Start Up And Shut Down
4.0 Start Up and Shut Down Startup Connect the monitor and the power. 2. The device will boot and the power indicator will display blue. 3. A wizard window will pop up. Shutdown Click “Start” and then select “Shutdown” icon. This will bring up a shutdown window. The device will shut down by clicking “OK”... -
Page 10: Login
5.0 Login The default username is admin and the default password is 123456. You must configure the wizard if you start the NVR for the first time and you may change the password when you configure the wizard for the first time. You can skip the settings wizard next time. Click “Start”... -
Page 11: Configurations And Connections
6.0 Configurations and Connections 6.1 Network Configuration & Adding IP Camera After you finish adding IP cameras, you can see the live images through the monitor of the NVR. The following will mainly introduce how to add the IP cameras via LAN/WAN. Set the network of the NVR. - Page 12 Quick Start Guide PoE 16 Channel H.265 8MP NVR with 8HDD Bays, Facial Recognition and LPR 5. Checkmark the device you want to add and then click “Add” button.The NVR will automatically refresh the cameras and return to “Edit Camera” interface. “Online” status means connecting the device successfully and you will see the live image.
-
Page 13: Upnp
7.0 UPnP You can use the UPnP function to enable the fast connection of the device to WAN via a router without port mapping. Go to Start → Settings → Network → UPnP, and enable UPnP and then click “Apply” button to save. -
Page 14: Nat
8.0 NAT NAT Settings The NVR shall be powered on and connected to the network. 2. Go to Start → Settings → Network → TCP/IP. You can obtain the IP address, subnet mask and gateway automatically. You can also manually enter them according to the actual network situation. -
Page 15: Manual Recording And Playback
9.0 Manual Recording and Playback 9.1 Manual Recording Before recording, please install and format a HDD. In the live interface you can see the menu toolbar. Click button to start recording. Click it again to stop recording. You can also click to check the status of the recording. - Page 16 Sales +44(0)1707 330541 Enquiries sales@genieproducts.co.uk Website www.genieproducts.co.uk...
Need help?
Do you have a question about the WNVR832P5AI and is the answer not in the manual?
Questions and answers