Table of Contents
Advertisement
3.4 Power-down and Revert
When the DVR run under Recording, Timing recording, Alarm Recording, if the power of DVR to be turn off or be forced to turn off, and turn on the
power again, DVR will automatically save the recording before turn off, and automatically to revert the operating condition before turn off to work on.
3.5 Preview
After log in system of DVR, system will automatically directly enter the preview mode
In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on the picture, re setting the
date. There is a alarm input mode icon. (the meaning of every kind of icon as following table)
Channel picture attention
1
When that channel recording, this mark will be showed
on it
2
When there is a motion detection alarm in that channel,
this mark will be show on it
5
When the video be Dodging, this mark will be showed on that channel
3.6 Recording operation
Customer can according to select the different kind of recording mode in this system. For the different kind of recording mode you set, the channel
will be showed the mark on everyone channel.
3
When there is a video loss in that channel, this mark will
be showed on it
4
The mark of alarm input mode
25
Advertisement
Table of Contents
