Genie 4CH User Manual page 49

4.2.3.1 System Setup
【System Time】Be used for modify the current system date and time of DVR, click the right hand side button to save the modification;
【Date Format】Select the date display format, including year/month/date, month/date/year, date/month/year etc;
【Date separator】There are three different kind of selection in it, "— " " / " "." , if you select "." , then the system time will display as: 2008.07.20
【Time Format】Including 24 hours and 12 hours;
【Recording Length】Can setting the duration of everyone recording file, default is 60 minutes;
【Identification Number】Be used for the situation that use one remote controller unit to over one DVR, only press the ID of remote controller unit on
it and the same corresponding DVR ID number, so, you can control the DVR;
【Video System】According to setup setting different system;
【Menu Standing by】Possible to set the menu standby-time 20-60second, 0 is not set the standby-time, if you Setup time, behind that time slice,
system automatic log off the current login user, if the user wants to operate menu, must to login again.
49