Rear Axle Assembly Attachment
Fig. 8-3
The trike sub-frame and mainframe attach at the swing arm attachment location with a 1-
3/4" spacer (on both sides) Fig. 8-3. The high strength alloy rod ends that are used to
secure the rear axle assembly to the trike sub-frame must be properly aligned with the
transmission to insure that the drive shaft yoke assemble will pivot properly.
WARNING
Improper alignment of the rear axle assembly can damage the drive train of the trike,
which may result in serious personal injury. IT IS RECOMMENDED THAT ALL
DRIVETRAIN SERVICE AND ALIGNMENT PROCEEDURES ARE CONDUCTED
BY YOUR AUTHERIZED BOSS HOSS DEALER.
Trike Sub-frame and Rear Axle Assembly Fig. 8-4
© Copyright Boss Hoss Cycles, Inc. 2004. All Rights Reserved.
79