Wheels - Boss Hoss Cycles Year 2005 Owner's Manual

Rear Axle Component Description & Part Numbers from FIGURE 3-4
Item #
1 Rear Pulley Mounting Bolts
2 Left Axle Spacer
3 Bearings
4 Bearing Spacer
5 Rear Caliper
6 Rear Caliper Mounting bolts
7 Right Axle Spacer
8 Brake Caliper Mount
9 Cotter Pin
10 Axle Nut and Washer
11 Rotor Bolts
12 Rear Rotor
13 Axle
14 Axle Housing
15 Rear Pulley
Chart 3.3
DISASSEMBLY OF REAR WHEEL FIG. (3-4)
1. With wheel assembly removed, place cardboard or equivalent for protection down
on the floor. Rotate the wheel assembly over placing the pulley flat on top of the
cardboard, this allows easy removal of the brake rotor and wheel.
2. Remove the rear brake disc mounting bolts (11) using a T45 Torx bit tool. Remove
brake disc (12).
3. Remove rear wheel lug nuts using a ¾" socket. Remove wheel.
4. Remove dust seals from outside of housing and remove bearings for inspection.
© Copyright Boss Hoss Cycles, Inc. 2004. All Rights Reserved.
Description Part #
8000620
6430226-1
6310218
6310219
6520300PA
818025
6430205-1
6570302C
8500616
6410210 & 11
8110408
6510300B5CA
6410201
6310203
3730103
30