SEAT
Boss Hoss motorcycles use Mustang Seats. The standard seat has a driver seat and a
passenger seat that could also be used as a three-position driver backrest.
Standard Mustang Seat configuration
CAUTION
• If the passenger seat is used as a backrest, DO NOT apply excess force against the
backrest. The three-position tab can be bent if excessive force is applied.
Improper operation can cause paint damage.
• When re-installing the passenger seat into the driver seat, be certain that the
tongue is inserted into the seat groove properly. It can mistakenly be slid into the
foam only and have no support from the driver seat. This may allow the top edge
of the tongue to contact the seat pan and storage compartment lid. PAINT
DAMAGE COULD OCCUR.
© Copyright Boss Hoss Cycles, Inc. 2004. All Rights Reserved.
Fig. 3.21
44