HANDLEBAR CONTROLS
THROTTLE CONTROL
The throttle control must operate freely without binding and the carburetor throttle must
return to the closed position.
Warning
Check for free operation of the throttle grip allowing full range of carburetor
linkage movement before operating vehicle.
LEFT HANDLEBAR CONTROLS
Horn
FIGURE 3.13
The left handlebar control assembly contains a push button switch for headlamp hi-lo
beam, horn and left turn signal, and a push button reverse located just to the left of the
high beam button switch, this button engages the transmission to reverse from the neutral
position. You shift up with your toes on the front shifter level to put the transmission into
reverse and then hold the reverse button to engage reverse. Reverse is powered by the
engine and is specially designed to engage smoothly at engine idle.
NOTE: SEE TRANSMISSION SECTION FOR FULL EXPLANATION.
© Copyright Boss Hoss Cycles, Inc. 2004. All Rights Reserved.
Left Turn Signal
High Beam
Reverse Button
(Bike Only)
39