FUEL PUMP
The fuel pump, a Carter P4070 (4-6 psi, 72 gph) is mounted on the frame tube just above
the transmission bell housing on both the bike and trike. The wiring connects to the
main harness connector. A wire safety clip included, should be installed securing the
pump terminal connectors to the pump.
Fuel Pump for bike and Trike
Fig.5-2
THROTTLE LINKAGE
The throttle bracket is bolted to the intake manifold. The throttle return spring is attached
to a tab mounted on the top front left side frame splice bolt.
© Copyright Boss Hoss Cycles, Inc. 2004. All Rights Reserved.
52