Axis 200 User Manual page 34

AXIS 200+ and 240 User's Guide
Configuring the Dial-Up Adapter
The following instructions describe how to set up a Microsoft Windows 95B PC for modem
dial-up connection to an Axis Camera Server. Deviations from these instructions can be expected
when using other operating systems.
It is assumed that the TCP/IP, dial-up networking, modem and serial port configurations are
correctly installed. If this is not the case, please consult your Windows 95 documentation and
install these before configuring the dial-up adapter for access to your Axis Camera Server.
1. From the Control Panel, double click
the Network icon and highlight your
Dial-Up Adapter. Click Properties.
2. Go to the Advanced tab. Select Use IPX
header compression from the Property:
list, and enter the value No in the Value:
drop down list. Click OK.
3. Double click My Computer on your
desktop and double click the Dial-Up
Networking icon.
4. Right click Make New Connection.
Select Properties.
5. Enter the phone number to which your
Axis Camera Server is connected.
Appendix C -Modem Installation
33