Axis 200 User Manual page 33

Appendix C -Modem Installation
32
Connecting Your Modem:
1. Connect modem to phone line.
2. Connect your modem to the RS-232 modem port on your camera server.
3. Connect your modem to Power and power up your modem.
4. Restart your Axis Camera Server.
If the modem you are using is one of the "plug and play" modems you should now be able to dial
from a PC to your camera server and connect.
Note:
the default IP number of your camera server is 192.36.253.80.
Changing the Modem Baud Rate
After successfully connecting to your camera server from a PC (as described in Configuring the
Dial-Up Adapter, on page 33), you can now increase the baud rate of your modem. To do this,
follow the instructions below:
1. From the Home page of your Axis Camera Server, click Settings.
2. Log on as root (default password is pass).
3. Click the Serial port/Modem button (AXIS 200+/AXIS 240) to go to the modem page and
modify the baud rate so that it is compatible with your modem. The new port speed will take
effect next time you restart your Axis Camera server.
Notes:
The maximum baud rate for the Axis 200+ Camera Server is 38400bps and 115200bps for the
Axis 240 Camera Server.
More information regarding CDPD and GSM modems is available on the Axis web site at
http://www.axis.com/
AXIS 200+ and 240 User's Guide