Ip Configuration - Planet GSW-1602SF User Manual

4.2.2 IP Configuration

The IP Configuration includes the DHCP Client, IP Subnet Address and Management VLAN Setting. The screen in
4-3 appears.
The page includes the following configurable data; see the table 4-2 description of the IP Configuration.
Item
Configured
DHCP Client
IP Address
Subnet Mask
Gateway -
Management VLAN
Current
DHCP Client
Figure 4-3 IP Configuration screen
Description
Choose what the Web Smart Gigabit Switch should do following power-up: transmit a
DHCP request, or manual setting (Disable). The factory default is "Disable".
The IP address of the Web Smart Gigabit Switch. The factory default value is
192.168.0.100
The IP subnet mask for the Web Smart Gigabit Switch. The factory default value is
255.255.255.0
The default gateway for the Web Smart Gigabit Switch. The factory default value is
192.168.0.254
Specifies the management VLAN ID of the Web Smart Gigabit Switch. It may be configured
to any value in the range of 1 to 4094. The management VLAN is used for management of
the Web Smart Gigabit Switch.
Display current DHCP Client Status, Disable or Enable.
User's Manual of GSW-1602SF / GSW-2404SF
-23-
Figure