About the VLAN ports connect to the hosts, please refer to 4.5.4.1 and 4.5.4.2 examples. The following steps will focus on
the VLAN Trunk port configuration.
1.
Specify Port-8 to be the 802.1Q VLAN Trunk port, and the Trunking port must be a Tagged port while egress. The
Port-8 configuration as the following screen in
2.
Assign the VLAN Trunk Port to be the member of each VLAN – which wants to be aggregated. At this sample, add
Port-8 to be VLAN 2 and VLAN 3 member port.
3.
Repeat Step 1 and 2, setup the VLAN Trunk port at the partner switch.
4.
To add more VLANs to join the VLAN trunk, repeat Step 2 to assign the Trunk port to the VLANs.
Figure 4-54.
Figure 4-54 The configuration of VLAN Trunk port
Figure 4-55 Add VLAN Trunk port to each VLAN
-73-
User's Manual of GSW-1602SF / GSW-2404SF