Igmp Snooping Status - Planet GSW-1602SF User Manual

4.8.2 IGMP Snooping Status

The IGMP Snooping Status display the current IGMP Status and the statistics of received Query / report packets. The
"IGMP Snooping Status" screen is displayed as in
The page includes the following fields: table 4-24 description of the IGMP Snooping Status.
Item
Description
Auto Refresh
Disable or Enable the Auto Refresh function. While set to enable, the IGMP Snooping Status l
will refresh automatically every 30 seconds.
VLAN ID
Identifies a VLAN and contains information about the Multicast group configuration.
Querier
Display the current status of IGMP Querier on the device.
Active – The IGMP Query function had been enabled on the device and played as a main
Idle – The IGMP Querier function had be enabled but might be at the initiation status, or there're
Queries
Statistics of IGMP Query packets transmitted from the VLAN. Only the "IGMP Querying
transmitted
Figure
Figure 4-68 IGMP Snooping Status
Querier within a subnet domain. Within a network domain, there will be only one IGMP
Querier. While two or more Querier exist, only one Querier operation by election.
The Querier will transmit a IGMP Query packet about every 125 secs.
already other Querier exist.
User's Manual of GSW-1602SF / GSW-2404SF
4-68.
-94-