Timers Window
Timer Reset Window
Rand McNally IntelliRoute
®
TND
TM
700 User's Guide
Timers and Logs
Note:
Odometers count up and record the current mileage. Maintenance
counters count down. When a maintenance timer reaches 2,000 miles, a
reminder displays each time the TND starts.
View Timers and Odometer Readings
Main Menu
From the
:
Truck Tools > Timers and Logs.
Tap
1
Tap the Timers tab
.
2
Timers Window
The
displays.
3
To reset a timer, tap on the timer.
Timer Reset Window
The
Change To
On the left, use the
hours. The mileage/hours continue to count down from the changed value.
This would be used occasionally if you need to make an adjustment to the
current value.
Reset
On the right, use the
normally zero. At the beginning of each day or run, tap
value back to zero.
4
To change the current reading, in the
to specify the new setting, then tap
To reset the maximum settings, tap
5
Back
6
Tap
to save changes.
displays.
field to make corrections to mileage or
field to set the most common reset value,
Reset
Change To
field, use
Change
.
Reset
.
to set the
and
71