Timers - Rand McNally intelliroute TND 720 User Manual

Rand McNally IntelliRoute TND 720 User Manual
® ™

Timers

Note: Odometers count up and record the current mileage. Maintenance
counters count down. When a maintenance timer counts down to 2,000
miles, a reminder displays each time the TND starts.
Note: To avoid timer warnings, set the timer limits to a very high number.
1. Tap Truck Tools.
2. Tap Timers, Logs, Trails, Fuel.
3. Tap the Timers tab.
To change a timer, tap on the timer to be reset.
On the left, use the Change To field to make adjustments to
mileage or hours. The mileage/hours continue to count down
from the changed value.
--
1. Tap to decrease the setting.
+
2. Tap to increase the setting.
3. Tap the calculator to display a keyboard. Enter a number and tap Enter.
4. Tap Change.
On the right, use the Reset To field to set the most common reset
value, normally zero. At the beginning of each day or run,
tap Reset to set the value back to zero for odometers and 15,000
or 35,000 for maintenance odometers.
--
1. Tap to decrease the setting.
+
2. Tap to increase the setting.
3. Tap the calculator to display a keyboard. Enter a number and tap Enter.
4. Tap Reset.
5. Tools & Features
40