Power The Device; Turn The Device On; Turn The Device Off; Enter Or Return From Standby (Sleep) Mode - Rand McNally intelliroute TND 700 User Manual

Power Key
Reset Button
Rand McNally IntelliRoute ® TND TM 700 User's Guide

Power the Device

Note:
To maximize battery life, plug in the IntelliRoute® TND™ 700 for the first
two (2) hours of use. See "First Time Use" on page 11.

Turn the Device On

• Press and hold the Power Key for two (2) seconds, then release.
(After 5-10 seconds, the Rand McNally splash window displays as the device
powers on.)

Turn the Device Off

• Press and hold the Power Key for five (5) seconds, then release.
A message displays indicating that the device is powering off.

Enter or Return from Standby (Sleep) Mode

• Press and release the Power key.
Note:
The device performs a status check when returning from Standby mode.
The IntelliRoute TND 700 restarts if the status check determines it is necessary
to do so.

Reset the Device

Resetting the device restores some settings back to their original settings and
restarts the device.
When you reset the device, your current route information is lost. Address Book
entries, trips, settings, ratings, and messages to Rand McNally are not affected.
Note:
Use this procedure only when instructed to do so by Rand McNally
Customer Support Personnel.
• Use a paper clip to press the reset button located on the back of the
device case.
13