Wiring The Wall-Mounted Bypass Switch - Powerware 9155 User Manual

Wiring the Wall-Mounted Bypass Switch

Powerware 9155 UPS (8–15 kVA) User's Guide
®
The Powerware 9155 UPS has the following power connections:
2-phase (L1 and L2), neutral, and ground connection for
rectifier/bypass input
2-phase (L1 and L2), neutral, and ground connection for load output
The nominal input/output voltages are:
100/200, 110/220, or 120/240 Vac with 180° phase displacement
120/208 or 127/220 Vac with 120° phase displacement
Output overcurrent protection and disconnect switch must be provided
by others.
Figure 28 on page 47 shows a oneline diagram of the UPS with a
wall-mounted bypass switch.
164201553 Rev D www.powerware.com
S
Wall-Mounted Bypass Switch Installation
41