Settings; Handset Settings (Hs Settings) - Doro COMFORT 1010 Manual

Note!
As default the last 20 incoming answered and unanswered calls are stored along
with the date and time of the calls.
Caller ID messages
The following messages will be displayed occasionally:
OUT OF AREA
Unknown number, e.g. international call.
WITHHELD
Information about the number is blocked. Number cannot be
displayed.
Message indication from your network operator*.
* Only functions in certain countries.
To remove the message indicator: Press

Handset settings (HS SETTINGS)

. Select HS SETTINGS. Press OK.
1. Press
2. Select desired function e.g. ALARM. Press OK.
3. Select desired setting. Press OK.
ALARM
When the alarm is activated
the alarm goes off, a signal will be heard for 45 seconds. The
signal can be turned off with any key. If SNOOZE is activated the
alarm will go off again approximately 7 minutes later. Turn the
alarm off permanently via the menu or by holding L down for
a few seconds. The volume is determined by the set ringer level.
RING SETUP Select ringer signal for INT. RING (internal calls) and for EXT.
RING (external calls).
RING VOLUME The handset ringer signal can be adjusted.1 = lowest, 5 =
highest, or VOLUME OFF. Press OK to confirm.
TONE SETUP Any of the following warning tones can be disabled: KEY TONE,
BATTERY TONE and OUT OF RANGE.
LANGUAGE
Language of display texts.
RENAME HS
Text displayed in standby.
HS DISPLAY
Display either name or time in standby.
English
and then press and hold 4 .

Settings

is displayed in standby. When
5