Register A New Handset - Doro PHONEEASY 100W Manual

Please note!
When the alarm goes off, a signal will be heard for 45
seconds. The signal can be turned off with any key. If
SNOOZE
is activated the alarm will go off again approx.
7 minutes later. Turn the alarm off via the menu or by holding
down for a few seconds. The volume is determined by the
L
handset ringer volume. If the handset ringer is set to OFF, the
alarm still sounds at

Register a new handset

All handsets included in the package are already registered to
the base unit. Only for separate handsets/service measures. You
can register up to 5 handsets to one base unit.
Please note!
This model is GAP (Generic Access Profile) compatible,
which means that the handset and the base unit can both be
used with most other GAP compatible units irrespective of
manufacturer. However the GAP protocol cannot guarantee
that all functions may be accessed.
1. Hold down
2. Press
w 0
3. Select the base unit (1, 2, 3 or 4) you wish to register.
Press
w 0
4. Enter the base unit's PIN code (e.g. 0000). Press
5. If the registration is successful the unit will return to
standby mode within one minute.
VOLUME 1
(base unit) until indicator flashes.
J
. Scroll to REGISTER. Press
.
English
level.
21
.
w 0
w 0
.