Battery Led - Doro ARC 3 Manual

Connection
1. Connect mains adapter/phone cable to wall sockets.
2. Insert batteries (1.2V NiMH AAA) in accordance with the markings.
3. Charge with the keypad facing outwards (24 hours the first time).
4. Press (left menu button).
5. Scroll to HS SETTINGS.
/
{ }
6. Press OK (left menu button).
7. Scroll to LANGUAGE. Press OK.
8. Scroll to desired setting. Press OK.
9. Press or several times to exit the menu screens.
L
IMPORTANT: Use the telephone line cord supplied, an existing line cord from a previous phone may not be compatible.
Date/Time
10. P ress (left menu button).
11. Scroll / to HS SETTINGS. Press OK.
{ }
12. S croll to HS DISPLAY. Press OK.
13. S croll to TIME. Press OK.
14. S croll to DATE & TIME. Press OK.
15. S croll to SET TIME. Press OK.
16. E nter time of day (HH-MM). Press OK.
17. S croll to SET DATE. Press OK.
18. E nter date (DD MM YY). Press OK.
19. P ress
or several times to exit the menu screens.
L
The format of date/time can also be adjusted.
Battery
When the batteries are relatively new and fully-charged (10 hours) they will last for approx. 100 hours' standby time or
approx. 10 hours' call time. These times apply at normal room temperature. �ull battery capacity will not be reached
until the batteries have been charged 4-5 times. It is not possible to overcharge or damage the batteries by charging
them for "too long". It may take up to 5 minutes charging before display wakes up, if batteries are totally empty.
Please note!
When the battery is low or when there is too great a distance to the base unit the telephone will be unable to connect to a
line. Do not place the base unit close to other electrical equipment, in direct sunlight or other strong heat sources! This is to
minimize the risk of any interference. It is normal for the device to become warm during charging and this is not dangerous. Use
only original batteries. The guarantee does not cover any damage caused by using the wrong batteries.

Battery LED

When the batteries are running low,
Please note that the complete battery indicator in the display will flash as long as the handset is charging, and when the
battery is fully charged only the inner segment will flash.
Paging
The handset will ring when
button on the handset or the
L
These times apply at normal room temperature. �ull battery capacity will not be reached These times apply at normal room temperature. �ull battery capacity will not be reached
It is not possible to overcharge or damage the batteries by charging It is not possible to overcharge or damage the batteries by charging
will flash and a warning tone will be heard when a call is in progress.
(on the base unit) is pressed. The signal will stop automatically after a while or if the
J
button on the base unit are pressed.
J
English
�ull battery capacity will not be reached �ull battery capacity will not be reached