Table of Contents
Advertisement
BASE UNIT (SYSTEM) PIN-CODE
Registration of new handsets to the base or barring (not allowing) certain phone
numbers is restricted to holders of the base unit PIN-Code. The base unit PIN-code is
a four digit code, and from new is 0000. It is recommended that this is changed to a
number of your choice.
1. Enter the base menu and scroll until "System PIN" is displayed, then press OK.
2. Enter the PIN-code of the system/base unit (from new 0000).
3. Enter the new PIN-code twice and then press OK.
DEREGISTER
Any handset can be deregistered from the base unit. This means that the identity
number of the selected handset is erased from the list of registered handsets. Note: It
is recommended that you do not de-register the master handset (handset no.1)
1. Enter the base menu and scroll until "Deregister" is shown, then press OK.
2. Enter the PIN-code of the system/base unit (from new 0000).
3. Enter the identity number of the handset that is to be erased by pressing the
corresponding keypad digit button, then press OK.
SET TO DEFAULT
All features and settings will reverted to default. Registration and PIN-code will not
be affected.
1. Enter the base menu and scroll until "Set to default" is shown, then press OK.
2. Enter the PIN-code of the system/base unit (from new 0000).
3. The handset will return to standby mode.
27
Advertisement
Table of Contents
