Ducati DESMOSEDICI RR Owner's Manual page 28

Erase USB
This function lets you erase the data saved to the USB data
logger: the data logger must be connected to vehicle wiring.
To erase data, enter the menu page "Erase USB".
If button (1, fig. 5) is held depressed in the B "t" position for
3 seconds while the USB data logger is not acquiring any
data, the display shows message "WAIT..." for 10 seconds;
after these 10 seconds, message " OK " is displayed for 2
seconds to confirm that the data in the USB data logger have
B= On 3 sec.
been erased.
If button (1, fig. 8) is held depressed in the B "t" position for
E
3 seconds while the USB data logger is acquiring data, data
YES
logger memory is not erased and the display shows message
USB=ON
"ErASE FAIL" for 2 seconds.
NO
2-sec. displ.
4-sec. WAIT time
2-sec. displ.
fig. 22
28