Ducati DESMOSEDICI RR Owner's Manual page 26

Stored data display (LAP Memory)
Displays data stored using the LAP function: lap time, MAX
speed and MAX RPM.
To view stored lap times, enter the menu and go to page
"LAP MEM".
In this menu page, press button (1, fig. 8) in position B "t"
for 3 seconds to view the "1st lap"; the display will show lap
number, lap time, MAX speed and MAX RPM reached during
that lap.
Press button (1, fig. 8) in position B "t" to scroll through the
30 laps stored until returning to the 1st lap.
E
If button (1, fig. 8) is held depressed in position B "t" for 3
seconds while viewing lap times, the display will instantly
reset all stored lap times and the LAP function is disabled
automatically if active.
MAX speed stored is shown by the display in the Lap
function.
If MAX speed reading exceeds 299 Km/h (186 mph) while
the information is stored, speed reading is displayed
(example: 316 Km/h).
If the memory is empty, the display shows the 30 times, with
the lap timer reading "00.00.00", MAX RPM = 0 and MAX
speed = 0.
If the engine reached one of the two thresholds before the
limiter or the limiter threshold during a lap, the corresponding
lights (10, fig. 4) come on while viewing stored lap times.
26
press B
press B. . x 19
B= On 3 sec.
Re s et o f a ll s t o r ed t i m e s
press B. . x 19
fig. 20