Ducati DESMOSEDICI RR Owner's Manual page 16

Upon Key-On, the Dashboard always displays the following
information (and any functions activated previously are
deactivated):
Odometer
Air Temperature
Clock
Speed
Engine coolant temperature
Engine rpm
With the button (1, fig. 8) set to B "t", the Odometer
E
readout will cycle through the following functions:
TRIP A
TRIP B
TRIP FUEL (only if active)
until cycling back to the TOT function.
Pressing button (1, fig. 8) in position A "s" gives access to
the MENU and the following functions are displayed one
after another:
Error (only if active)
BATT
RPM
LAP (OFF or ON)
LAP MEM
USB (OFF or ON)
Erase USB
TIME Set
CODE (only if active)
16
A
1
B
Important
This menu is only active when the vehicle is running at
less than 20 Km/h; if this MENU is open while the vehicle is
running faster than 20 Km/h, the instrument panel will exit it
automatically and go back to the start-up display screen; you
may exit the menu at any time by holding button (1, fig. 8)
depressed in position A "s" for 3 seconds.
fig. 8