Disk Wiping Menu - Lexmark C925 User Manual

Understanding printer menus
Menu item
Verify Job Expiration
Off
1 hour
4 hours
24 hours
1 week
Reserve Job Expiration
Off
1 hour
4 hours
24 hours
1 week
Note: Off is the factory default setting.

Disk Wiping menu

Disk Wiping erases only print job data on the printer hard disk that are not currently in use by the file system. All
permanent data on the printer hard disk are preserved, such as downloaded fonts, macros, and held jobs.
Note: This menu appears only if a formatted, non-defective printer hard disk is installed.
Menu item
Wiping Mode
Auto
Manual
Off
Manual Wiping
Do not start now
Start now
Description
Sets a time limit on how long the printer stores print jobs needing verification
Sets a time limit on how long the printer stores print jobs for printing at a later time
Description
Disk Wiping erases only print job data that is not currently in use by the file system
from the printer hard disk. All permanent data on the printer hard disk is preserved,
such as downloaded fonts, macros, and held jobs.
Notes:
•
Auto is the factory default setting.
•
Due to the large amount of resources required for Automatic Wiping,
activating this option may decrease printer performance, especially if the
printer requires hard disk space faster than it can be wiped and returned to
service.
Manual Wiping overwrites all disk space that has been used to hold data from a print
job that has been processed (printed). This type of wipe does not erase any
information related to an unprocessed print job.
Notes:
•
"Do not start now" is the factory default setting.
•
If the Disk Wiping access control is activated, then a user must successfully
authenticate and have the required authorization in order to initiate the disk
wipe.
120