Setting Up Wireless Printing - Lexmark C925 User Manual

Additional printer setup
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type control printers > OK
In Windows 7 or earlier
a
Click or click Start, and then click Run.
b
In the Start Search or Run dialog, type control printers.
c
Press Enter, or click OK.
2
Depending on your device, do either of the following:
• Press and hold the printer you want to update.
•
Right‑click the printer you want to update.
3
From the menu that appears, do either of the following:
•
For Windows 7 or later, select Printer properties.
• For earlier versions, select Properties.
4
Click the Configuration tab.
5
Do either of the following:
Click Update Now ‑ Ask Printer.
•
•
Under Configuration Options, manually add any installed hardware options.
6
Click Apply.
For Macintosh users
1
From the Apple menu, navigate to either of the following:
•
System Preferences > Print & Scan > select your printer > Options & Supplies > Driver
•
System Preferences > Print & Fax > select your printer > Options & Supplies > Driver
2
Add any installed hardware options, and then click OK.

Setting up wireless printing

Note: A Service Set Identifier (SSID) is a name assigned to a wireless network. Wireless Encryption Protocol (WEP)
and Wi-Fi Protected Access (WPA) are types of security used on a network.
Preparing to set up the printer on a wireless network
Notes:
•
Make sure your access point (wireless router) is turned on and is working properly.
•
Do not connect the installation or network cables until prompted to do so by the setup software.
Make sure you have the following information before setting up the printer on a wireless network:
•
SSID—The SSID is also referred to as the network name.
•
Wireless Mode (or Network Mode)—The mode is either infrastructure or ad hoc.
52