Cleaning The Motorcycle - Ducati MONSTER Owner's Manual

Cleaning the motorcycle

To preserve the finish of metal parts and paintwork, wash
and clean your motorcycle at regular intervals, anyway
according to the road conditions you ride in.
Use specific products only. Prefer biodegradable
products. Avoid aggressive detergents or solvents.
Important
Do not wash your motorcycle right after use. When
the motorcycle is still hot, water drops will evaporate
faster and spot hot surfaces.
Do not use high pressure water jets.
Never aim the nozzle direct at wheel bearings, front fork
seals, electric items, air inlets or exhaust pipe ends.
Clean off stubborn dirt or exceeding grease from engine
parts using a degreasing agent. Be sure to avoid contact
with drive parts (chain, sprockets, etc.)
Rinse with warm water and dry all surfaces with chamois
leather.
Warning
Braking performance may be impaired immediately
after washing the motorcycle.
Never grease or lubricate the brake discs. Loss of braking
and further accidents may occur. Clean the discs with an
oil-free solvent.
900 Cromo tank
Clean the tank with special (non-abrasive) products for
chromium-plated surfaces at least once a month. This
will keep your tank bright and shiny.
E
55