Bag Supports - Ducati MONSTER Owner's Manual

Bag supports (fig. 50.1 and 50.2)
Removal
Remove the side bags. Unscrew the 4 screws (1) that
hold the upper bracket of each bag to the frame.
Remove the upper support of each bag from the frame.
Loosen the two grub screws (2) from the inner face of
each footpeg bracket and withdraw the bag bottom
bracket from the footpeg bracket.
E
Refitting
Fit bottom bracket onto bag by sliding stud into lower
catch.
Assemble the two parts of the upper bracket and fix
them to the frame near the passenger grab handle.
Tighten the 4 fastening screws (1) of the two parts,
working crossways. Do not overtighten.
Slide bag bottom bracket onto passenger footpeg
bracket. At the same time, engage the other two catches
of the bag with the fastening bracket.
Set bag in the proper position and tighten the grub
screws (2).
Attention
When finished, always make sure the screws (1)
and grub screws (2) are tightened securely before riding.
78
1
fig. 50.1
2
fig. 50.2