Chain Lubrication; Replacing Bulbs - Ducati MONSTER Owner's Manual

Chain lubrication

The chain fitted on your motorcycle has OR seals that
keep dirt out of and lubricant inside the sliding parts. The
seals might be irreparably damaged if the chain is
cleaned using non-specific solvents or washed using
steam or water jets. Dry the chain using compressed air
or absorbent material and apply SHELL Advance Chain or
Advance Teflon Chain on each link.
Important
Using non-specific lubricants may lead to severe
damage to chain, front and rear sprocket.

Replacing bulbs

Before replacing a burnt-out bulb, make sure that the
new one complies with voltage and wattage as specified
on page 64 - "Electric System".
Headlamp (fig. 34.1)
To gain access to headlamp bulbs, slacken the lower
screw (1) holding the rim-reflector assembly to the body
and disconnect the connector (2, fig. 34.2) from the
headlamp. Release the clip (3, fig. 34.2) that secures the
bulb and remove it from the socket.
Replace the bulb.
E
fig. 34.1
47